Boss Embossers Baby’s Breath Bouquet Debosser & Cutter

Baby’s Breath Bouquet Debosser & CutterBring delicate botanical detail to your bakes with the Baby’s Breath Bouquet Debosser & Cutter. Featuring fine stems, dainty blossoms and an elegant flowing bow, the debosser creates an intricate recessed impression ready for painting, layering or piped accents. The coordinating cutter produces a neat matching outline, allowing the bouquet to become the focal point of statement cookies, fondant plaques and cake toppers. Measuring approximately 10cm x 9cm, this versatile floral design is ideal for weddings, bridal showers, Mother’s Day, baby showers, christenings and romantic celebrations. Designed and made in Australia from durable PLA+ filament. Product Details: Baby’s breath bouquet debosser with matching cutter Detailed floral stems and flowing bow design Approximate size: 10cm x 9cm Suitable for cookie dough, fondant, sugarpaste and modelling paste Ideal for painting, layering and piped detailing Suitable for floral and botanical celebration themes Material: PLA+ filament Made in Australia Care Instructions:  Hand wash only in warm water below 60°C. Do not soak or place in the dishwasher, as excessive heat or prolonged moisture may cause warping.

Boss Embossers Wildflower Bunch on Semi Circle Blank Stamp & Cutter

Wildflower Bunch on Semi Circle Blank Stamp & CutterCreate elegant floral treats with the Wildflower Bunch on Semi Circle Blank Stamp & Cutter. The design combines a delicate bouquet of wildflowers with a softly curved frame, leaving a generous blank space for adding names, short messages, dates or miniature decorative elements. Use your own lettering stamps to personalise the open area, then highlight the floral details with painted accents, layered fondant or piped finishes. The matching cutter creates a neat coordinating outline, while the approximate 9.8cm x 7.2cm size makes it ideal for statement cookies, fondant plaques and cake toppers. Perfect for Mother’s Day, baby showers, “Baby in Bloom” themes, birthdays, weddings and thoughtful gifts. Designed and made in Australia from durable PLA+ filament. Product Details: Wildflower bunch stamp with a blank semicircular space Matching cutter included Approximate size: 9.8cm x 7.2cm Open area for names, dates and short messages Suitable for cookie dough, fondant, sugarpaste and modelling paste Ideal for personalised floral designs Material: PLA+ filament Made in Australia Care Instructions:  Hand wash only in warm water below 60°C. Do not soak or place in the dishwasher, as excessive heat or prolonged moisture may cause warping.

Boss Embossers Driverless Vintage Race Car & Numbers Set with Stamp and Cutter

Driverless Vintage Race Car & Numbers Set with Stamp and CutterBring vintage motorsport style to celebration bakes with the Driverless Vintage Race Car Stamp, Cutter & Numbers Set. The streamlined open-top car design features classic racing details without a driver or helmet, creating a clean stamped finish ready for colouring, layering and personalised decoration. A number paddle and coordinating mini cutter are included, allowing you to add a chosen racing number to the car. The matching full-size cutter produces a neat outline for consistent results. Measuring approximately 11cm x 5.2cm, the design is ideal for statement cookies, fondant plaques and cake toppers for racing-themed birthdays, milestone celebrations and motorsport events. Designed and made in Australia from durable PLA+ filament. Product Details: Driverless vintage race car stamp with matching cutter Open-top design without a driver or helmet Number paddle with coordinating mini cutter included Customisable racing-number detail Approximate car size: 11cm x 5.2cm Suitable for cookie dough, fondant, sugarpaste and modelling paste Ideal for painting, layering and two-tone decorating Material: PLA+ filament Made in Australia Care Instructions:  Hand wash only in warm water below 60°C. Do not soak or place in the dishwasher, as excessive heat or prolonged moisture may cause warping.

Boss Embossers 3 Balloon Blank Debosser & Cutter

3 Balloon Blank Debosser & CutterCreate personalised celebration treats with the 3 Balloon Blank Debosser & Cutter. The design features a trio of balloons gathered with delicate strings and a tied bow, leaving each balloon blank for adding ages, initials, patterns or miniature decorative elements. Pair the balloon spaces with small stamps and cutters to create designs suited to any theme or colour palette. The matching cutter produces a neat coordinating outline, while the approximate 9cm size is ideal for statement cookies, fondant plaques and cake toppers. Perfect for birthdays, baby showers, christenings, graduations and other special occasions. Designed and made in Australia from durable PLA+ filament. Product Details: Three-balloon debosser with matching cutter Delicate string and bow detailing Blank balloon spaces for personalisation Approximate size: 9cm Suitable for cookie dough, fondant, sugarpaste and modelling paste Ideal for use with mini stamps, cutters and decorative elements Material: PLA+ filament Made in Australia Care Instructions:  Hand wash only in warm water below 60°C. Do not soak or place in the dishwasher, as excessive heat or prolonged moisture may cause warping.

Boss Embossers Mini Letter Beads Paddle Set Debosser & Mini Cutter

Mini Letter Beads Paddle Set Debosser and Mini CutterAdd personalised details to your bakes with the Mini Letter Beads Paddle Set Debosser and Mini Cutter. The letter paddles create small, clean alphabet impressions, while the coordinating round cutter produces miniature bead shapes that can be arranged to form names, initials and short messages. Perfect for decorating cookies, cupcakes, fondant plaques and cake toppers, the individual letter beads can be positioned around existing designs or used as delicate standalone accents. This versatile set is ideal for birthdays, baby showers, weddings and personalised celebration treats. Designed and made in Australia from durable PLA+ filament. Product Details: Mini alphabet debosser paddle set Includes a mini round bead cutter Creates individual letter-bead decorations Ideal for names, initials and short messages Suitable for fondant, sugarpaste and modelling paste Complements a wide range of cookie stamps and cutters Material: PLA+ filament Made in Australia Care Instructions:  Hand wash only in warm water below 60°C. Do not soak or place in the dishwasher, as excessive heat may cause warping.

Boss Embossers Vintage Party Hat with Chin Strap Debosser & Cutter

Vintage Party Hat with Chin Strap Debosser & CutterBring nostalgic charm to celebration bakes with the Vintage Party Hat with Chin Strap Debosser & Cutter. The design features a classic pointed hat with a pom-pom, scalloped trim and tied chin strap, creating an elegant recessed impression with plenty of space for personalisation. Add ages, initials, florals, patterns or piped details to coordinate the design with your chosen theme. The matching cutter creates a neat outline, while the generous 12cm x 6cm size makes it ideal for statement cookies, fondant plaques and cake toppers. Perfect for birthdays, first-birthday parties, baby celebrations, circus themes and vintage-inspired events. Designed and made in Australia from durable PLA+ filament. Product Details: Vintage party hat debosser with matching cutter Pointed hat, scalloped trim and tied chin-strap details Approximate size: 12cm x 6cm Blank centre for personalised decorations Suitable for cookie dough, fondant, sugarpaste and modelling paste Ideal for layered, painted and piped finishes Material: PLA+ filament Made in Australia Care Instructions:  Hand wash only in warm water below 60°C. Do not soak or place in the dishwasher, as excessive heat or prolonged moisture may cause warping.

Boss Embossers Wavy Glass Debosser & Cutter with Blank Drink Tag

Wavy Glass Debosser & Cutter with Blank Drink TagCreate stylish celebration treats with the Wavy Glass Debosser & Cutter with Blank Drink Tag. Featuring a contemporary stemmed glass with softly curved detailing, the debosser produces a clean recessed impression that can be enhanced with colour, metallic accents or layered fondant. The blank round drink tag can be personalised with a name, date or short message using your own lettering stamps. A small round “Bride” stamp is also included, making the set especially suited to hen parties, bridal showers, engagements and wedding celebrations. Complete with a matching cutter, the design measures approximately 10cm x 8cm and is ideal for statement cookies, fondant plaques and cake toppers. Designed and made in Australia from durable PLA+ filament. Product Details: Wavy glass debosser with matching cutter Blank round drink tag for personalisation Small round “Bride” stamp included Approximate size: 10cm x 8cm Suitable for cookie dough, fondant, sugarpaste and modelling paste Ideal for painting, layering and metallic detailing Material: PLA+ filament Made in Australia Care Instructions:  Hand wash only in warm water below 60°C. Do not soak or place in the dishwasher, as excessive heat may cause warping.

Boss Embossers Rectangular Wavy Border Pop Debosser & Cutter

Rectangular Wavy Border Pop Debosser & CutterGive personalised bakes a contemporary finish with the Rectangular Wavy Border Pop Debosser & Cutter. Featuring a softly undulating rectangular frame, the debosser creates a clean recessed border with a generous blank centre for adding names, messages, monograms or decorative details. The coordinating cutter produces a neat matching outline for consistent results. Measuring approximately 10cm x 7cm, this versatile design is ideal for statement cookies, fondant plaques and cake toppers. Use it for birthdays, weddings, baby showers, bridal celebrations, place settings and personalised gifts. Designed and made in Australia from durable PLA+ filament. Product Details: Rectangular wavy-border debosser with matching cutter Approximate size: 10cm x 7cm Creates a clean recessed border Blank centre for personalised messages and designs Suitable for cookie dough, fondant, sugarpaste and modelling paste Ideal for painting, piping and layered decoration Material: PLA+ filament Made in Australia Care Instructions:  Hand wash only in warm water below 60°C. Do not soak or place in the dishwasher, as excessive heat may cause warping.

Boss Embossers Margarita Debosser & Cutter

Margarita Debosser & CutterBring a playful cocktail-inspired touch to your bakes with the Margarita Debosser & Cutter. Featuring a contemporary margarita glass complete with citrus-slice and glass detailing, the debosser creates a clean recessed impression ready for painting, layering or two-tone decorating. The coordinating cutter produces a neat matching outline for consistent results. Measuring approximately 9cm high, the design is ideal for statement cookies, fondant plaques, cake toppers and sugarpaste decorations. Perfect for birthdays, hen parties, cocktail evenings, summer celebrations and Mexican-themed events. Designed and made in Australia from durable PLA+ filament. Product Details: Margarita glass debosser with matching cutter Approximate height: 9cm Creates a detailed recessed design Suitable for cookie dough, fondant, sugarpaste and modelling paste Ideal for painting, layering and two-tone decorating Material: PLA+ filament Made in Australia Care Instructions:  Hand wash only in warm water below 60°C. Do not soak or place in the dishwasher, as exposure to heat and prolonged moisture may cause warping.

Boss Embossers Extra Mini Party Hat Debosser & Cutter

Extra Mini Party Hat Debosser & CutterAdd a playful finishing touch to celebration bakes with the Extra Mini Party Hat Debosser & Cutter. Measuring just under 2cm, this petite design features a classic party hat with delicate decorative details, creating a clean recessed impression in fondant, sugarpaste and modelling paste. The coordinating cutter produces a neat outline, making the tiny party hat easy to layer onto cookies, cupcakes, cake toppers and character designs. Its versatile size is ideal for birthdays, children’s parties, baby celebrations and other festive occasions. Designed and made in Australia from durable PLA+ filament. Product Details: Mini party hat debosser with matching cutter Measures just under 2cm Creates a recessed party hat design Suitable for fondant, sugarpaste and modelling paste Ideal for cookies, cupcakes, cake toppers and character decorations Material: PLA+ filament Made in Australia Care Instructions:  Hand wash only in warm water below 60°C. Do not soak or place in the dishwasher.

Boss Embossers Simple Cute Bear Head Stamp & Cutter

Simple Cute Bear Head Stamp & CutterCreate charming teddy bear-themed treats with the Simple Cute Bear Head Stamp & Cutter. Featuring a sweet, minimal bear face with softly rounded ears and clear embossed details, this coordinated set makes it easy to produce neat, professional-looking designs. Ideal for cookies, fondant, sugarpaste and modelling paste, the 9cm design offers plenty of space for two-tone decorating and personalised finishing touches. Use the stamp to imprint the bear’s facial features, then cut the matching outline for a clean, consistent shape. Perfect for baby showers, birthdays, christenings, woodland themes and children’s celebrations. Proudly designed and made in Australia from durable PLA+ filament with care and precision. Product Details: Simple bear head stamp with matching cutter Approximate size: 9cm Suitable for cookies, fondant, sugarpaste and modelling paste Ideal for two-tone and layered decorating Material: PLA+ filament Made in Australia Care Instructions:  Hand wash only in warm water below 60°C. Do not soak. Not suitable for the dishwasher.

Dekofee Modeling Tool Set of 14

The Dekofee modelling tool set mini is particularly suitable for fine and filigree work. But also great for modelling faces, figures, flowers and more. With a total of 28 different design heads available you have all the tools that you need in one set. Due to the size, the set is also ideal for children who want to start with modelling. Wash before first use. Content: 14 tools with a total of 28 design heads.

FMM Sugarcraft Entwined Hearts Cutters

Create elegant Entwined Hearts with this innovative cutter, no need to cut two hearts as this cutter does it all in one piece. Easy to use, the unique design of this cutter means that it can be used flat as a side design on a cake or used as a cake topper. Great for weddings but can also be used for other celebrations such as anniversaries and Valentine’s Day. Measurements: 130mm x 80mm 1 Cutter Full ‘how to’ instructions on back of packaging Main image shows the Entwined Hearts cutter being used with fondant Always use a good quality modelling paste rolled thinly and allowed to dry for a few minutes for best results, if using Sugar paste add a little Tylo or CMC to strengthen the paste and speed up drying

PME Flower / Leaf Modelling Tool

PME Modelling Tools - Flower/Leaf Shaper (167mm / 6.6”) This modelling tool is ideal for use with a wide range of edible and non-edible materials including sugar paste (rolled fondant), flower paste gum paste), marzipan or craft clays. Add simple but effective detail to enhance your cakes, flowers and models. Flower shaper: Often referred to as a Dresden Tool. Use the back of the tool to smooth and flute the paste, also ideal for creating a wide shaped veining on leaves and flowers. Leaf shaper: The perfect tool for creating fine detailed veining on leave and flowers. Place the back of the tool onto the paste and draw the details as required. Dimension: 167mm (6.6”)

PME Modelling tool - Bulbulous cone

PME Modelling Tools - Bulbulous Cone (167mm / 6.6”) This modelling tool is ideal for use with a wide range of edible and non-edible materials including sugar paste (rolled fondant), flower paste gum paste), marzipan or craft clays. Add simple but effective detail to enhance your cakes, flowers and models. For creating simple embossed shell patterns and borders, also ideal for making the feet of marzipan animals. Use the blade end of the tool to cut and trim the paste. Ideal to use with a foam pad. Dimension: 167mm (6.6inches)

PME Modelling tool-Serrated and Tapered cone

PME Modelling Tools - Serrated & Taper Cones Modelling Tool (163mm / 6.4”) This modelling tool is ideal for use with a wide range of edible and non-edible materials including sugar paste (rolled fondant), flower paste gum paste), marzipan or craft clays. Add simple but effective detail to enhance your cakes, flowers and models.Used to indent or emboss into paste to create a cone shaped hollow, ideal for modelling marzipan fruits e.g. apple, etc. The serrated cone end creates detailed and realistic throats when making a wide variety of flowers. Dimension: 163mm (6.4”)

PME Modelling tool-Tapered cones 5/6 star

PME Modelling Tools - Taper Cones 5/6 Star (154mm / 6.1”) This modelling tool is ideal for use with a wide range of edible and non-edible materials including sugar paste (rolled fondant), flower paste gum paste), marzipan or craft clays. Add simple but effective detail to enhance your cakes, flowers and models. Used as a simple star embosser. Also for creating the centres of five and six petal flowers or used as petal dividers. Dimension: 154mm (6.1”)

FMM Sugarcraft Save Our Planet Cutter Set

The FMM Save Our Planet tappit cutter is quick and easy to use and is perfect to decorate your cupcakes, cookies and larger celebration cakes. Create a range of animal and marine life decorations with these 5 different motifs, including an Orangutan, Dolphin, Koala, Sea Turtle and Tiger, these designs have been created to highlight how important wildlife is to our planet.

FMM Sugarcraft It's A Bugs Life Cutter Set

The FMM It's A Bugs Life tappit cutter is quick and easy to use and is perfect to decorate your cupcakes, cookies and larger celebration cakes. Create cute bug decorations with these 5 different motifs, including a Bee, Caterpillar, Snail, Ladybug and Butterfly.

Sweet Stamps by Amy Love - Sweet Stamp Cookie/Cupcake Embosser

Easily emboss trendy designs into your fondant/modelling chocolate or gumpaste with this beautiful range. Use them again and again! 60mm size is perfect for round cookies 70mm+, hexagon and standard heart shape cookies 76mm+.

PME Origami Flower Cutter Set - Set Of 3

Origami Flower Cutter – Set of 3 Sculpt Edible Elegance with the Grace of Japanese Origami Transform your cakes into breathtaking masterpieces with the PME Origami Flower Cutter Set, where fine craftsmanship meets artistic simplicity. Inspired by the delicate beauty of traditional Japanese origami, this refined 3-piece cutter set allows you to effortlessly create striking fondant or gum paste flowers in a matter of minutes. Each cutter is precisely designed to help you fold, layer, and shape graceful, modern blooms that radiate sophistication—ideal for wedding cakes, celebration toppers, and elegant cupcakes. Product Highlights: Inspired Design: Reflecting the art of Japanese origami, these petal cutters enable you to craft floral motifs with dimension, depth, and precision. 3 Cutter Sizes Included: The set includes three carefully calibrated cutters to help you achieve a complete layered flower design approximately 125mm in diameter. Easy & Elegant Application: Simply cut, glue, and fold to bring your edible floral vision to life—perfect for decorators of all skill levels. Versatile Medium Use: Ideal for use with fondant, gum paste, modelling chocolate, or wafer paper. Add a luxurious, hand-crafted floral touch to your cakes and confections. With the PME Origami Flower Cutter, creating couture-style edible blooms has never been so effortless. Fold, sculpt, and impress—bring elegance to every petal. Set comprises of 3 cutters and makes a flower of approximately 125mm diameter.

FMM Sugarcraft Mix 'n' Match Large Face cutter - 5inch/125mm

The Mix ‘n’ Match Large Face Cutter is a revolutionary ‘all-in-one’ cutter designed to make an endless variety of animal and novelty faces. A huge selection can be created to decorate celebration cakes. This pack contains one cutter that allows you to make a 5" (125mm) face shape and a selection of features to create a huge assortment of faces. You can use sugarpaste and fondant but for best results use modelling paste. With this revolutionary ‘all-in-one’ animal face cutter, you can create an endless variety of cake toppers, from cute unicorns to cats and dogs, farm, zoo animals and dragons. With a little imagination, use the ear cutter to create fins and beaks and a unicorn horn can become a lobster’s eyes, an elephant’s trunk, a butterfly’s body – even a carrot!

FMM Sugarcraft Party Balloons cutter set

PME Knife & Ribbon Insertation Blade - Modelling Tool

PME tools offer a huge range of professional equipment. All have instructions enclosed for ease of understanding Approx L120mm

Culpitt Cake Decorating Tool Kit - 10 Different Tools

Cake Star's cake decorating tool kit is an absolute essential for any beginner. The set includes 10 pieces of modelling tools including a rolling pin and smoother. Exclusive to Culpitt. Boxed: 6

FMM Sugarcraft Seasonal Leaves Cutter Set Of 4

Oak, hawthorn, maple and sycamore leaves make up this beautiful Seasonal leaves set, especially perfect for Autumn or Fall, though there’s nothing stopping you using them all year round. Made in the UK Food Approved Plastic – BPA free 4 Cutter Full ‘how to’ instructions on the back of the packaging The main image shows the Seasonal Leaves cutters being used with fondant Always use a good quality modelling paste rolled thinly and allowed to dry for a few minutes for best results if using Sugar paste add a little Tylo or CMC to strengthen the paste and speed up drying

Sweet Stamps by Amy Sweet Stamp - Tropical Vibes Set - Sweet Bakes

To use: Simply lay the floral sweet stamps in the desired floral print pattern, peel Tacky pad, please directly on top and press with even pressure onto your fresh sugar paste/fondant. Stamps can also be the use of modelling chocolate, ganache, buttercream, sugar cookies.   

PME Marzipan Sugarpaste Spacers Tool

15 inch / 380mm marzipan & fondant icing spacers by PME pair of 38cm / approx 15 inches long plastic marzipan spacers perfect for rolling out sugar paste, marzipan, dough and flower modelling paste approx 15" / 38cm / 383mm long use two ways - produce 6mm and 10mm depths food approved plastic top shelf dishwasher safe

Sweet Stamps by Amy SWEET STAMP - Botanical Dreams by The Caketress

PAINT BRUSHES AND STICKY BOARD  SOLD SEPARATELY    Botanical Dreams by The Caketress Master floral print impressions that can be painted however you like or even beautiful left naked. These floral Sweet Stamps were created from hand drawn illustrations from world renown cake designer,  The Caketress . With these multi-use  and food safe hard plastic stamps, cake designs are endless with mix and match pattern features of the leaves, stems, branches, and several sized flowers. 

PME Tool Caddy - Consisting of 14 professional modelling tools

PME Tool Caddy with 14 sugarcraft modelling tools set comprises: PME#1 bone tool PME#2  blade & shell tool PME#3  ball tool PME#4  scallop & comb tool PME#5  serrated & tapered cone tool PME#6  scriber needle tool PME#6T thick scriber needle tool PME#7  trim knife & ribbon insertion tool PME #8 taper cones 5/6 star tool PME#9  bulbulous cone tool PME#10 flower leaf shaper tool (aka Dresden tool) PME cutting wheel PME Quilting wheel tool PME design wheeler  complete in handy plastic caddy box each tool approx 15cm - 17cm long food approved plastic - some with stainless steel fittings PLEASE NOTE this set contains sharp scalpel blades and pointed scriber tools - use with care - by ordering you confirm you are at least 18 years of age genuine PME - "PME" moulded on handles retail packed

Decora Double Tip "Sail" Silicone Precision Modelling Tool

Double-ended silicone tools to make details to sugar paste and gum paste characters made with the modelling technique. The different shapes of the tips and the different softness of each of them allow to model every single detail. The ergonomic handle in "soft", anti-slip gum make them very easy and comfortable to use.

Decora Double Chisel Tip Silicone Precision Modelling Tool

Double-ended silicone tools to make details to sugar paste and gum paste characters made with the modelling technique. The different shapes of the tips and the different softness of each of them allow to model every single detail. The ergonomic handle in "soft", anti-slip gum make them very easy and comfortable to use.

Decora Double Angle Tip Silicone Precision Modelling Tool

Double-ended silicone tools to make details to sugar paste and gum paste characters made with the modelling technique. The different shapes of the tips and the different softness of each of them allow to model every single detail. The ergonomic handle in "soft", anti-slip gum make them very easy and comfortable to use.

Decora Ribbon/Smile Modelling Tool

They're perfect for the modeling, to make flowers and details of 3d characters. Each tool is double-ended thus having a double function. The ergonomic handle in "soft", anti-slip gum makes them very easy and comfortable to use.

Decora Ball/Sphere Modelling Tool 15/4mm

They're perfect for the modelling, to make flowers and details of 3d characters. Ideal for flower modelling, used to cup and shape leaves, petals and frills Each tool is double-ended thus having double function. The ergonomic handle in "soft", anti-slip gum make them very easy and comfortable to use.

Decora Pyramid/Star Modelling Tool

They're perfect for the modelling, to make flowers and details of 3d characters. Each tool is double-ended thus having double function. The ergonomic handle in "soft", anti-slip gum make them very easy and comfortable to use.

Decora Ball/Sphere Modelling Tool 12.2/9mm

They're perfect for the modelling, to make flowers and details of 3d characters. Ideal for flower modelling, used to cup and shape leaves, petals and frills Each tool is double-ended thus having double function. The ergonomic handle in "soft", anti-slip gum make them very easy and comfortable to use.

Decora Shell/Star Modelling Tool

They're perfect for the modelling, to make flowers and details of 3d characters. Each tool is double-ended thus having double function. The ergonomic handle in "soft", anti-slip gum make them very easy and comfortable to use.

Decora Spindle/Little Spoon Modelling Tool

They're perfect for the modelling, to make flowers and details of 3d characters. Each tool is double-ended thus having double function. The ergonomic handle in "soft", anti-slip gum make them very easy and comfortable to use.

Decora Ball/Sphere Modelling Tool 5.6/7.6mm

They're perfect for the modelling, to make flowers and details of 3d characters. Ideal for flower modelling, used to cup and shape leaves, petals and frills Each tool is double-ended thus having double function. The ergonomic handle in "soft", anti-slip gum make them very easy and comfortable to use.

PME Designer Wheeler Modelling Tool with 3 Interchangeable Wheel Heads

Set of 3 interchangeable wheels for creating ribbons and cutting simple and intricate shapes Dimension: 131mm (5.2”) Made from food grade plastic Easy to use and clean Handwashing recommended

FMM Sugarcraft Flute & Vein Modelling Tool

This product is a must for all cake decorators (also known as a dresden tool). Adds detailed lines and shapes to flowers, leaves and other decorations.

FMM Sugarcraft Knife & Scriber Modelling Tool

This handy tool will both trim and cut paste while the scribbler end will mark out designs.

FMM Sugarcraft Ridged Cone & Mini Ball Modelling Tool

This tool gives you a small 5 pointed star for intricate flowers and a small ball tool to frill them to a delicate thickness.

FMM Sugarcraft Ball Modelling Tool - Large & Small

A basic tool used to shape or soften paste edges.

FMM Sugarcraft Bone Modelling Tool - Large & Small

One of the most popular modelling tools, used extensively when making flowers and shapes and feathering edges

PME Scallop & Comb Modelling Tool

This scallop and comb tool can be used to cut scalloped edge cut circular holes in plaques and emboss mouth shape on faces. It can also be used to mark dotted lines to represent stitching or score parallel lines. SCALLOP AND COMB - The scallop is brilliant for marking details on modelled figures from smiles and frowns to eyebrows - absolutely indispensable. The comb can be used to add textured designs to your paste. A Quality Product of PME. Made in England

PME Blade & Shell Modelling Tool

SHELL AND BLADE - The blade allows you to cut your shapes without marking your board while the Shell tool can be used for boarders around cakes and covered cake boards, as well as a variety of modelling jobs including the feet for modelled animals and of course shells! Blade & Shell shaped modelling tool ideal for cutting and marking gumpaste, sugarpaste marzipan etc. The Shell end  creates simple embossed shell patterns on cakes particularly around edges and borders. PME Blade and shell modelling tool made from hard wearing plastic. This modelling tool is ideal for the cutting and marking of creations made in gum paste, sugarpaste, marzipan etc. The shell end creates simple embossed shell patterns on cakes particularly around edges and borders. Measuring 167mm (6.6inches) this tool is easy to use and clean. A Quality Product of PME. Made in England

PME Bone Modelling Tool with Dual Edge

BONE TOOL SHELL -  The bone tool is perfect for smoothing and frilling the edge of petals, leaves, and frills. Simply position the tool on the edge of the paste and smooth round to thin and shape the paste. The smaller end gives a frillier effect while the larger end gives a soft and gentle flounce. A very versatile tool for all types of modelling. A Quality Product of PME. Made in England

PME Ball Modelling Tool

The Ball Tool is one of the most important tools to have on hand for any cake artist.  Most commonly used for thinning out gum paste flower petals to provide thin & ruffled petal edges.  It is also ideal for other flower modelling techniques such as cupping & shaping leaves.  The small sized ball end is ideal for creating detail on fondant figures such as eye sockets, hands, and ears.  To cup petals begin by placing them onto a foam pad. Position the ball tool as required & press firmly while sliding around the surface of the petal. To create a stronger shape, gently rotate the modelling tool in a circle.   A Quality Product of PME. Made in England